Epoxy Floor Coatings
A tough, easy-to-clean coat for garages, laundry rooms and workshops, laid over a ground and repaired slab so it bonds to the concrete instead of sitting on top.
Bedrock Spring Valley Concrete Coatings is a flooring contractor based in Spring Valley. We coat, polish, seal and resurface concrete floors in Rancho San Diego, from garages and patios to pool decks, basements and shops.

Rancho San Diego sits in the county's Valle de Oro area, south of El Cajon and right next to Casa de Oro-Mount Helix. It's mostly homes, with shops and businesses along the main roads. A lot of the houses we see here sit on sloped or hillside lots, with attached two- and three-car garages, concrete patios and a good number of backyard pools. That ground shapes the work. A garage slab cut into a slope can draw moisture up from the soil behind it, so we test before we pick a coating. A pool deck out here takes full sun most of the year, so it needs a surface that stays cooler underfoot and holds its color.
What moves the price here is the size of the floor, how much grinding and crack repair the slab needs, and the coating you choose. The schedule turns on that same prep, the cure time between coats and, for patios and pool decks, the weather. Your own figure comes from the estimate I write after I've seen the slab.
I come out to every job and write the estimate, and our crew does the prep and coating, so your price comes from someone who has seen your concrete.
We grind, clean and repair the slab before anything goes on it, because nobody sees that work once the floor's done, but it decides how the coating holds up.
When we pack up, your garage or patio should look the way it did before we came, just with a better floor, so you're not cleaning up after us.
A tough, easy-to-clean coat for garages, laundry rooms and workshops, laid over a ground and repaired slab so it bonds to the concrete instead of sitting on top.
For shops, warehouses and businesses around Rancho San Diego, we lay thicker epoxy systems that stand up to forklifts, carts and spills, and we plan the work around your hours.
Many garages we see here have oil spots and hairline cracks, so we lift the stains and fill the cracks before the color flakes and topcoat go down.
A fast-curing coating that holds its color in sun, so it suits garages that sit open to afternoon light, and it needs careful prep because it sets quickly.
A poured epoxy with swirled metallic color for living rooms, home gyms and showroom garages, and since every flaw in the slab shows through, we grind it flat first.
A heavy, heat- and moisture-tolerant floor for commercial kitchens, breweries and wash-down areas, where regular epoxy can soften or lift under hot water and cleaning.
We grind and polish the slab itself to a low-gloss or high-shine finish, which suits open-plan homes and shops where you'd rather have no coating to wear or peel.
Acid or water-based stain gives patios and interior slabs a mottled, earthy color, and we seal it afterward so the color holds up to foot traffic and sun.
Chips of glass or stone set in epoxy and ground smooth, for entries and commercial lobbies where you want a hard-wearing floor that cleans up with a mop.
Basements and lower-level rooms on hillside homes can push moisture up through the slab, so we test it before choosing a coating, because the wrong one can bubble and lift.
We grind off old sealer, stains and the slab's top skin so the coating grips open, clean concrete, and that step decides how the floor holds up.
A clear sealer for driveways, patios and walks slows oil stains and water soaking in, and outdoor sealers usually need a fresh coat every few years.
When a patio or walk is worn, flaking or stained but still sound underneath, a thin cement overlay gives it a new surface without tearing out the concrete.
For uneven or patched slabs, we pour a cement that flows out flat on its own before tile, wood or a coating goes down, so the finished floor doesn't dip.
Pool decks here take full sun and pool water, so we repair the cracks and lay a textured coating that's easier on bare feet and less slick when wet.
Peeling paint, failed epoxy or old tile adhesive has to come off before anything new goes down, so we strip it back to bare concrete and haul the waste away.
Send the form and we'll reply within one business day to set a time for me to come out. The estimate is done on site, it's free, and there's no obligation.
We're fully licensed and insured, and our work is backed by our satisfaction guarantee, so you know who stands behind the floor after our crew leaves.
If your concrete can't take the coating you had in mind, I'll say so and tell you what it can handle, rather than sell you a floor that looks good for one season.
We take calls from 6 AM to 9 PM on weekdays and 7 AM to 9 PM on weekends, so you can reach us before or after work.
Straight answers to the permit and license questions that come up before a floor job in Rancho San Diego.
The County of San Diego does, because Rancho San Diego is unincorporated county land with no city government of its own. The county handles building permits, zoning and code compliance here, and questions about a building application go to the county's building division at (858) 565-5920.
That's for the county's building official to say, and the county expects both the person doing the work and the person hiring them to find out before work begins. We check with the county on your address before we start. If a permit's needed, we'll walk you through it and take care of our part.
Yes, whenever the job needs a building permit, the contractor uses employees, or labor and materials add up to $1,000 or more on one or more contracts. A bigger job can't be split into smaller pieces to stay under that line. The county requires no business license here, though other rules may apply, so the state license is the one to ask about.
These are the cities with their own page, and we work in many other cities around Spring Valley too. If you're not sure we cover your address, just ask.
Call (619) 648-8003 or send the form with a note on cracks, stains or old coating, so I know what to check on site.