Epoxy Floor Coatings
Our everyday fix for a stained, dusty garage or workroom slab. We grind it open first so the epoxy grabs the concrete instead of sitting on old sealer.
Bedrock Spring Valley Concrete Coatings is a flooring contractor working in Lemon Grove, CA. We grind, repair and coat concrete in garages, patios, pool decks, basements and small shops, with epoxy, polyaspartic, polished and sealed finishes.

Lemon Grove is a short drive from our base in Spring Valley, and the calls we get there look a lot like the rest of our work. Homeowners have a garage floor that's stained and pitted, or a patio or pool deck that's lost its finish, and a few owners of small shops and warehouses need a floor that stands up to carts and spills. We work the same way here as we do in Spring Valley and Rancho San Diego.
The price comes down to the slab itself. It depends on how much old sealer, paint or coating has to come off, how many cracks and low spots need filling, how big the floor is and which system you pick. The schedule turns on that same prep, and on whether the city tells us a permit is needed. A slab that's had years of cars, oil and patching on it usually needs more grinding before anything will stick, so I'll tell you at the estimate what yours needs and what it'll cost.
I come out to see your floor and write the estimate in person, because the condition of the slab decides the plan and I want to see it with my own eyes.
Before we start, we ask the office that covers your address, since some addresses here fall under a city and others under the county. If a permit is needed, we'll walk you through it.
We take our time grinding and repairing the slab before anything goes down. Nobody sees that work once the floor is done, but it decides whether the floor holds up.
Our everyday fix for a stained, dusty garage or workroom slab. We grind it open first so the epoxy grabs the concrete instead of sitting on old sealer.
For shops and small warehouses where carts, forklifts and spills wear a floor down fast. We plan the work around your hours so the business keeps moving.
One of our most common calls. We fill the cracks, grind off old paint and lay a coating that holds up to tires, oil drips and dropped tools.
A faster-curing coating for a garage or patio you need back soon. At the estimate, I'll tell you whether your slab is a good fit for it.
A poured, swirled finish for a game room, basement or showroom. It shows every flaw underneath, so we grind the slab flat and patch it first.
A heavy-duty floor for commercial kitchens and wash-down areas that see hot water and harsh cleaners every day, where a thinner coating would wear through.
We grind and polish the concrete you already have into a hard, glossy floor that suits a busy shop or an open living area.
Color that soaks into the concrete itself, for a patio, studio or living room. Old spills and patches show through, so we look closely at the slab first.
Chips of glass or stone set in a binder and ground smooth. It suits an entry or lobby that gets heavy foot traffic and still needs to look sharp.
Below-grade slabs can push moisture up through the concrete, so we test before we coat and pick a system that can live with what we find.
This is the step that decides how long any floor lasts. We grind off old coatings, glue and high spots so the new finish bonds to clean, open concrete.
A clear coat for a driveway, patio or garage that just needs protection from stains and wear without changing the look of the concrete much.
When a patio or walkway is pitted or scaled but still solid underneath, a thin overlay gives it a new surface without tearing out the slab.
When a floor is out of level or patched in too many places, we pour a self-leveling layer so the next floor gets a flat start.
We repair cracks and resurface tired pool decks with a textured finish that gives bare feet better grip than worn, slick concrete.
Old epoxy, paint, tile glue or carpet adhesive has to come off before anything new goes down, and we take it off without gouging the slab.
Send the form and we'll reply within one business day to set a time. I'll come out, look at your slab and write the estimate, with no pressure and no obligation.
I'd rather tell you plainly what your concrete can handle than sell you a finish that looks good for a season and then starts to peel.
Once you say go, our crew handles the grinding, the repairs and the coating, so the people who prep your slab are the same people who lay the floor.
Our work is backed by our satisfaction guarantee, and we leave your garage or yard the way we found it, only with a better floor.
Lemon Grove homeowners usually ask these questions about permits, licenses and timing before they hire someone to redo a floor.
Yes. Lemon Grove requires every business working inside city limits, contractors included, to have a City business license before the job begins. The city also won't issue a building permit until the general contractor and every subcontractor have one, so it's worth asking anyone who bids on your floor.
We find out before we start by asking the city's Building Division, which handles building permits for every home and business in Lemon Grove. If your job needs a permit, each city review typically takes at least 30 days, and the permit expires if work hasn't started within 180 days, so we plan the start date around that.
Yes, for any job a crew does. California requires a state contractor license for work that needs a building permit, uses employee labor or costs $1,000 or more in labor and materials combined. We're fully licensed and insured, and Lemon Grove checks the contractor's state license number before it issues a permit.
These cities have their own pages on our site, but we work in many others around Spring Valley. If you're not sure we cover your address, just ask.
We pick up seven days a week, from 6 AM on weekdays and 7 AM on weekends until 9 PM, so call when it suits you.